# Capture traffic of device connected to the router

**URL:** <https://discourse.mitmproxy.org/t/capture-traffic-of-device-connected-to-the-router/1203>\
**Category:** Uncategorized\
**Created:** [September 4, 2018, 10:36am UTC](https://discourse.mitmproxy.org/t/capture-traffic-of-device-connected-to-the-router/1203 "2018-09-04T10:36:31Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![arya6000](https://yyz2.discourse-cdn.com/flex030/user_avatar/discourse.mitmproxy.org/arya6000/32/214_2.png) [@arya6000](https://discourse.mitmproxy.org/u/arya6000)\
**Post date:** [September 4, 2018, 10:36am UTC](https://discourse.mitmproxy.org/t/capture-traffic-of-device-connected-to-the-router/1203/1 "2018-09-04T10:36:31Z")

</div>

I have a device that is connected to my own router. I want to be able to see the http(s) requests being made by the device. However there is no way for me to set the device to use a proxy server. From what I researched this may be possible by using a transparent proxy. But what if the requests are in https? Would that still be possible?

---

<div class="post-metadata">

**Author:** ![Gigiarum](https://yyz2.discourse-cdn.com/flex030/user_avatar/discourse.mitmproxy.org/gigiarum/32/278_2.png) [@Gigiarum](https://discourse.mitmproxy.org/u/Gigiarum)\
**Post date:** [September 10, 2018, 8:31am UTC](https://discourse.mitmproxy.org/t/capture-traffic-of-device-connected-to-the-router/1203/2 "2018-09-10T08:31:41Z")

</div>

Yes, transparent mode is the correct way but you have to install the mitmproxy’s certificate in your device.